Tag Archives: Multi Grain

Coconut Pain Au Levain

5 May

It’s great to be back home from my 11 day trip to China for business.  I couldn’t wait to get home to my wife and my 5 kitty cats.  We recently adopted another furball named Cleopatra and she has lived up to her name taking over the household like she’s been with us forever.

Anyway, I was chomping at the bit to bake some bread so after refreshing my starter I decided to make a simple sourdough Pain Au Levain, but of course I needed to add something different to the formula to make it a bit more interesting.

I had recently purchased some coconut flour from Whole Foods and decided to try adding some to this concoction and see what happens.  I also added some wheat germ, Durum flour and pumpernickel flour along with bread flour.   The levain starter was made with my standard 65% AP starter along with some whole wheat and bread flour.  I also added some dried toasted onions which I rehydrated in the water used for the dough.

The resulting dough turned out very interesting with a nice nutty flavor but a bit dense.  The coconut flour really soaks up the water and in hindsight I should have uppped the hydration level of this bread even though it is already 71%.

Starter (Levain)

71 Grams Seed Starter (65% AP Starter)

142 Grams Bread Flour

85 Grams Whole Wheat Flour

151 Grams Water (90 Degrees F.)

Final Dough

458 Grams Levain from Above

260 Grams Bread Flour

65 Grams Pumpernickel Flour

75 Grams Coconut Flour

25 Grams Durum Flour

35 Grams Toasted Wheat Germ

17 Grams Sea Salt

4 Grams Toasted Dried Onions

15 Grams Walnut Oil (You can substitute your oil of choice)

336 Grams Water, 90 degrees F.  (Note: If you want a more open crumb I would increase the water another 15 – 20 grams)

Directions

Levain

Combine the ingredients for the Levain and mix by hand or in your mixer for 1-2 minutes.  Place it in a covered glass or plastic bowl and let it sit for 9-10 hours at room temperature.  If you are ready to bake you can use it immediately, otherwise you can refrigerate it for at least 1-2 days.

Final Dough

For the final dough, using your stand mixer or by hand, mix the water with the Levain to break it up.

Add the toasted onions to re-hydrate them in the water and then add the flours and oil and mix on the lowest speed for 2 minutes.  Let rest for 15 minutes.

Now add the salt and mix for 4 minutes more on medium speed, adding more flour if necessary to produce a slightly sticky ball of dough.

Remove dough to your lightly floured work surface and knead for 1 minute and form into a ball.

Leave uncovered for 15 minutes.

Do a stretch and fold and form into a ball again and cover with a clean moist cloth or oiled plastic wrap.

After another 15 minutes do another stretch and fold and let it rest again for another 10 – 15 minutes.  Do one last stretch and fold and then put it  into a lightly oiled bowl that has enough room so the dough can double overnight.

Let the dough sit in your bowl for 2 hours at room temperature.  It should only rise slightly at this point.  After the 2 hours are up put in your refrigerator for at least 12 hours or up to 3 days.

When ready to bake the bread take your bowl out of the refrigerator and let it sit at room temperature for around 2 hours.  After 2 hours shape the dough as desired being careful not to handle the dough too roughly so you don’t de-gas it.

Place it in your bowl, banneton or shape into baguettes.  I used my new banneton I found in a thrift store and made one large loaf.

Let it sit at room temperature for 2 hours covered with oiled plastic wrap or a moist cloth.

Pre-heat oven with baking stone (I use one on bottom and one on top shelf of my oven), to 500 degrees F.

Slash loaves as desired and place empty pan in bottom shelf of oven.

Pour 1 cup of boiling water into pan and place loaves into oven.

Lower oven to 450 Degrees and bake for 25 – 35 minutes until bread is golden brown and internal temperature reaches 200 degrees.

Shut the oven off and leave the bread inside with the door slightly open for 10 minutes.  This will help dry the loaves out and keep the crust crunchy.

Let cool on cooling rack and enjoy!

This post has been submitted to the Yeast Spotting Site here: http://www.wildyeastblog.com/category/yeastspotting

 

Advertisements

Multi-Grain Sourdough Act 2

13 Apr

My first attempt this bread I concocted came out excellent with a nice moist open crumb and crisp crust.  I decided it was time to try it again and change-up some of the flours and grains used in the soaker.  I just picked up some Bulgar Wheat so I decided to add that to the soaker along with rolled oats, malt rye berries, oat bran and cracked wheat.  I also used a different mix of flours including spelt which has become one of my favorites due to its nutty flavor.  I used pumpernickel flour instead of medium rye as well.

In trying to calculate the bakers percentages for this recipe I included all the water from the soaker, final dough and also the water from my refreshed 65% hydration AP starter.  When I calculated the water from the starter it also included the water from the seed starter which I’m not sure it that is necessary or not, but the overall hydration of this dough ended up being 86%.  If you are not comfortable with wet doughs, you may not want to try this one.  I do have to say that a lot of the water is absorbed by the soaker so it’s not really as wet as it sounds.

If you venture to try this, please let me know how your attempt comes out.

Ingredients

Soaker

28 Grams. Rolled Oats

57 Grams Malted Rye Berries

57 Grams Bulgar Wheat

28 Grams Oat Bran

28 Grams Cracked Wheat

359 Grams Boiling Water

Final Dough

425 Grams White Starter recently refreshed

98 Grams Whole Wheat Flour

86 Grams Pumpernickel Rye Flour

28 Grams Spelt Flour

144 Grams First Clear Flour (you can substitute bread flour or High Gluten Flour)

14 Grams (2.5 Tsp) . Seas Salt or Table Salt  (Note: I usually use 2.5 Tsps. of salt, but I have started to weigh the salt which ended up being 14 grams.  According to my conversion program it should be 18 grams)

173 Grams Water, 90 degrees F.

Directions

Mix all ingredients for soaker in a bowl and add boiling water.  Let it sit for 2-3 hours covered until the grains are soft.

After 2-3 hours add the soaked grains along with the remaining liquid in your mixing bowl and add the flours, salt and remaining water and mix for 2 minutes.  The dough should come together in a shaggy mess and should be relatively moist at this point.  Let it rest for 5 minutes and mix for 4 minutes more on medium low-speed.

Remove dough from mixing bowl to work surface and do a stretch and fold.  You may need to wet or oil your hands and the work surface since the dough will still be very sticky at this point. Form the dough into a ball and let it rest uncovered for 10 minutes.  Let the dough rest uncovered for 10 minutes.  After 10 minutes do another stretch and fold and cover the dough with a moist lint free towel or plastic wrap sprayed with non-stick cooking spray.  Do another stretch and fold two more times letting the dough rest 10 minutes each time.  After the last stretch and fold put the dough into an oiled bowl and cover it tightly.

Let the dough sit in your bowl for 2 hours at room temperature.  It should only rise slightly at this point.  After the 2 hours are up put in your refrigerator for at least 12 hours or up to 3 days.

When ready to bake the bread take your bowl out of the refrigerator and let it sit at room temperature for around 2 hours.  After 2 hours shape the dough as desired being careful not to handle the dough too roughly so you don’t de-gas it.

Place it in your bowl, banneton or shape into baguettes.

Let it sit at room temperature for 2 hours covered with oiled plastic wrap or a moist cloth.

Pre-heat oven with baking stone (I use one on bottom and one on top shelf of my oven), to 500 degrees F.

Slash loaves as desired and place empty pan in bottom shelf of oven.

Pour 1 cup of very hot water into pan and place loaves into oven.

Lower oven to 450 Degrees and bake for 25 – 35 minutes until bread is golden brown and internal temperature reaches 200 degrees.

Shut the oven off and leave the bread inside with the door slightly open for 10 minutes.  This will help dry the loaves out and keep the crust crunchy.

Let cool on cooling rack and enjoy!

This post has been submitted to the Yeast Spotting Site here: http://www.wildyeastblog.com/category/yeastspotting

Multi-Grain Sourdough

28 Feb

I get a kick out of trying new types of flours and grains in my bread baking.  I frequently shop on-line at King Arthur Flour and like to try new and different products when I can.  I’ve read many recipes on The Fresh Loaf using soakers and have tried a few recipes from Peter Reinhart’s Whole Grain Bread book with mixed results.  I decided the other day to try my own formula using a multi grain soaker from my baking supply bin and also used some of my existing refreshed sourdough starter mixed with some rye, whole wheat and first clear flours.  The results were surprisingly good considering I had no idea what to expect.  The final bread had a great nutty sour flavor with a nice thick crust and moist crumb.

Ingredients

Soaker

2 oz. Rolled Oats

2 oz. Malted Rye Berries

2 oz. Barley Flakes

1 oz. English Malted Wheat Flakes

1 1/2 Cups Boiling Water

Final Dough

15 oz. White Starter recently refreshed

3.5 oz. Whole Wheat Flour

3.5 oz. Medium Rye Flour

4 oz. First Clear Flour (you can substitute bread flour or High Gluten Flour)

2.5 Tsp. Salt

6 oz. Water, 90 degrees F.

Directions

Mix all ingredients for soaker in a bowl and add boiling water.  Let it sit for 2-3 hours covered until the grains are soft.

After 2-3 hours add the soaked grains along with the remaining liquid in your mixing bowl and add the flours, salt and remaining water and mix for 2 minutes.  The dough should come together in a shaggy mess and should be relatively moist at this point.  Let it rest for 5 minutes and mix for 4 minutes more on medium low-speed.

Remove dough from mixing bowl to work surface and do a stretch and fold.  You may need to wet or oil your hands and the work surface since the dough will still be very sticky at this point. Form the dough into a ball and let it rest uncovered for 10 minutes.  Let the dough rest uncovered for 10 minutes.  After 10 minutes do another stretch and fold and cover the dough with a moist lint free towel or plastic wrap sprayed with non-stick cooking spray.  Do another stretch and fold two more times letting the dough rest 10 minutes each time.  After the last stretch and fold put the dough into an oiled bowl and cover it tightly.

Let the dough sit in your bowl for 2 hours at room temperature.  It should only rise slightly at this point.  After the 2 hours are up put in your refrigerator for at least 12 hours or up to 3 days.

When ready to bake the bread take your bowl out of the refrigerator and let it sit at room temperature for around 2 hours.  After 2 hours shape the dough as desired being careful not to handle the dough too roughly so you don’t de-gas it.

Place it in your bowl, banneton or shape into baguettes.

Let it sit at room temperature for 2 hours covered with oiled plastic wrap or a moist cloth.

Pre-heat oven with baking stone (I use one on bottom and one on top shelf of my oven), to 500 degrees F.

Slash loaves as desired and place empty pan in bottom shelf of oven.

Pour 1 cup of very hot water into pan and place loaves into oven.

Lower oven to 450 Degrees and bake for 25 – 35 minutes until bread is golden brown and internal temperature reaches 200 degrees.

Shut the oven off and leave the bread inside with the door slightly open for 10 minutes.  This will help dry the loaves out and keep the crust crunchy.

Let cool on cooling rack and enjoy!

This post has been submitted to the Yeast Spotting Site here: http://www.wildyeastblog.com/category/yeastspotting