Tag Archives: Harvest Grains

Buttermilk Porridge Bread

23 Apr

MainI’ve been busy traveling for work this past month and have not had a lot of time for baking, but  finally I had a chance to bake again.

I used my usual procedure to make a porridge bread but decided to use buttermilk instead of milk or water in the porridge.  I also used some freshly ground durum flour, sprouted durum and some Harvest Grain Mix from KAF which includes whole oat berries, millet, rye flakes, and wheat flakes and four seeds (flax, poppy, sesame, and sunflower).  The end result is a tangy, hearty loaf with a wonderful moist crumb.

Closeup1

Buttermilk Porridge Bread (%)

Buttermilk Porridge Bread (weights)

Here are the Zip files for the above BreadStorm files.

Closeup2

Levain Directions Build 1

Mix all the levain ingredients together  for about 1 minute and cover with plastic wrap.  Let it sit at room temperature for around 7-8 hours or until the starter has doubled.  I used my proofer set at 83 degrees and it took about 4 hours.

Levain Directions Build 2

Add in the flours for stage 2 and the water and mix for a minute.  Let it sit at room temperature for around 7-8 hours or until the starter has doubled.  I used my proofer set at 83 degrees and it took about 4 hours.  I put it in the refrigerator and used it the next evening but you can use it to mix the main dough right away if you want.

Porridge Directions

Add about 3/4’s of the buttermilk called for in the porridge to the dry ingredients in a small pot set to low and stir constantly until all the water is absorbed.  Add the remainder of the buttermilk and keep stirring until you have a nice creamy and soft porridge.  Remove from the heat and let it come to room temperature before adding to the dough.  I put mine in the refrigerator and let it cool quicker.

 Main Dough Procedure

Mix the flours, Harvest Grains  and the water for about 1 minute.  Let the rough dough sit for about 20 minutes to an hour.  Next add the levain, cooled porridge and salt and mix on low for 4 minutes and speed #2 for another 2 minutes or by hand for about 6 minutes.   You should end up with a cohesive dough that is slightly tacky but very manageable.  Remove the dough from your bowl and place it in a lightly oiled bowl or work surface and do several stretch and folds.  Let it rest covered for 10-15 minutes and then do another stretch and fold.  Let it rest another 10-15 minutes and do one additional stretch and fold.  After a total of 2 hours place your covered bowl in the refrigerator and let it rest for 12 to 24 hours.  (Since I used my proofer I only let the dough sit out for 1.5 hours before refrigerating).

When you are ready to bake remove the bowl from the refrigerator and let it set out at room temperature still covered for 1.5 to 2 hours.  Remove the dough and shape as desired.

The dough will take 1.5 to 2 hours depending on your room temperature and will only rise about 1/3 it’s size at most.  Let the dough dictate when it is read to bake not the clock.

Around 45 minutes before ready to bake, pre-heat your oven to 550 degrees F. and prepare it for steam.  I have a heavy-duty baking pan on the bottom rack of my oven with 1 baking stone on above the pan and one on the top shelf.  I pour 1 cup of boiling water in the pan right after I place the dough in the oven.

Right before you are ready to put them in the oven, score as desired and then add 1 cup of boiling water to your steam pan or follow your own steam procedure.

After 5 minute lower the temperature to 450 degrees.  Bake for 35-50 minutes until the crust is nice and brown and the internal temperature of the bread is 205 degrees.

Take the bread out of the oven when done and let it cool on a bakers rack before for at least 2 hours before eating.

Crumb

Advertisements

Multi-grain w/Harvest Grain Soaker & Beer

8 Feb

FinalI love the rich nutty flavor beer adds to a sourdough especially when there is a good hearty mix of whole grain flours and add-ins.

For this loaf I wanted a good hearty bread so I used some fresh milled spelt and hard white winter wheat in the starter along with some KAF French style flour and for the main dough I made a soaker with KAF Harvest Grains.  The Harvest Grains contain oat berries, rye flakes, millet, wheat flakes, poppy seeds, sesame seeds and sunflower seeds.  I let this soak in hot water overnight and drained the excess water before adding it to the final dough.  I counted the water that was absorbed in the hydration of the dough.

The main dough contains more French style flour along with spelt, hard white winter wheat (freshly milled) and some potato flour.

In the end this came out great with a nice deep nutty flavor with a bit of sweetness even though there is no sugar of any kind added.  I really love what the soaker added to this bake.  The bread just smells fantastic and this one is perfect for sandwiches or a good soup or stew.

Closeup1

Formula

MultigrainHarvestGrSoakerBe

Levain Directions

Mix all the Levain ingredients together for about 1 minute and cover with plastic wrap.  Let it sit at room temperature for around 7-8 hours or until the starter has doubled.  I usually do this the night before.

Either use in the main dough immediately or refrigerate for up to 1 day before using.

Soaker Directions

Add the boiling water to the Scald ingredients in a bowl and stir.  Cover with plastic wrap and let sit for 6-7 hours.  When ready to use drain excess water and follow directions below.

 Main Dough Procedure

Mix the flours, scald ingredients and beer  together in your mixer or by hand until it just starts to come together, maybe about 1 minute.  Let it rest in your work bowl covered for 20-30 minutes.  Next add the salt, starter (cut into about 7-8 pieces) and mix on low for 3 minutes.  Mix on medium for another 3 minutes and then remove the dough from your bowl and place it in a lightly oiled bowl or work surface and do several stretch and folds.  Let it rest covered for 10-15 minutes and then do another stretch and fold.  Let it rest another 10-15 minutes and do one additional stretch and fold.  After a total of 2 hours place your covered bowl in the refrigerator and let it rest for 12 to 24 hours.

When you are ready to bake remove the bowl from the refrigerator and let it set out at room temperature still covered for 1.5 to 2 hours.  Remove the dough and shape as desired.  I made 1 large boule shape.   Place your dough into your proofing basket(s) and cover with a moist tea towel or plastic wrap sprayed with cooking spray.  The dough will take 1.5 to 2 hours depending on your room temperature.  Let the dough dictate when it is read to bake not the clock.

Around 45 minutes before ready to bake, pre-heat your oven to 550 degrees F. and prepare it for steam.  I have a heavy-duty baking pan on the bottom rack of my oven with 1 baking stone on above the pan and one on the top shelf.  I pour 1 cup of boiling water in the pan right after I place the dough in the oven.

Right before you are ready to put them in the oven, score as desired and then add 1 cup of boiling water to your steam pan or follow your own steam procedure.

After 1 minute lower the temperature to 500 degrees and after another 3 minutes lower it to 450 degrees.  Bake for 35-50 minutes until the crust is nice and brown and the internal temperature of the bread is 210 degrees.

Take the bread out of the oven when done and let it cool on a bakers rack before for at least 2 hours before eating.

This post has been submitted to the Yeast Spotting Site here: http://www.wildyeastblog.com/category/yeastspotting/.

Crumb1

 Crumbcloseup