Tag Archives: corn

Toasted Almond Corn Porridge Bread

9 Feb

dsc_0075I made this bread last weekend after my return from my business trip to Germany.  I wanted to try changing up my method for mixing the porridge bread a bit to see if I could get a better result.  Since I’m home today enjoying the blizzard that’s hitting the east coast I finally had some time to post.

For this bake I added some toasted almond flour and fresh corn to rolled oats and barley flakes for the porridge.  I used a mixture of several whole grain flours which were all freshly milled.

I usually use my mixer for around 5 to 6 minutes on low and add the porridge in with the starter while mixing.  This time I only mixed the flour and starter for around 2 minutes and then stretched and folded in a bowl at 20 minute intervals for a total of 4 times.  After the second S & F I added in the porridge ingredients.

I’m not sure if this method worked any better than my normal method but either way the end result was a super moist and tasty bread.  The toasted almonds really added a wonderful nutty flavor combined with the other fresh flours.

The crumb was moderately open and moist.  The corn added a nice added flavor element as well.

dsc_0076

toasted-almond-corn-porridge-bread

toasted-almond-corn-porridge-bread-weights

Here are the Zip files for the above BreadStorm files.

dsc_0079

Levain Directions

Mix all the levain ingredients together  for about 1 minute and cover with plastic wrap.  Let it sit at room temperature for around 7-8 hours or until the starter has doubled.  I used my proofer set at 83 degrees and it took about 4 hours.  You can use it immediately in the final dough or let it sit in your refrigerator overnight.

Porridge Directions

Add about 3/4’s of the milk called for in the porridge to the dry ingredients in a small pot set to low and stir constantly until all the milk is absorbed.  Add the remainder of the milk  and keep stirring until you have a nice creamy and soft porridge.  Remove from the heat and let it come to room temperature before adding to the dough.  I put mine in the refrigerator and let it cool quicker.

 Main Dough Procedure

Mix the flours  and the water for about 1 minute.  Let the rough dough sit for about an hour or longer.  I actually left it for around 5 hours.  Next add the levain, and salt and mix on low for 2 minutes.     Remove the dough from your bowl and place it in a lightly oiled bowl or work surface and do several stretch and folds.  Let it rest covered for 10-15 minutes and then do another stretch and fold.  Repeat the stretch and folds a total of 4 times.  After the second S & F add the porridge and incorporate into the dough.  After a total of 2 hours place your covered bowl in the refrigerator and let it rest for 12 to 24 hours.  (Since I used my proofer I only let the dough sit out for 1.5 hours before refrigerating).

When you are ready to bake remove the bowl from the refrigerator and let it set out at room temperature still covered for 1.5 to 2 hours.  Remove the dough and shape as desired.

The dough will take 1.5 to 2 hours depending on your room temperature and will only rise about 1/3 it’s size at most.  Let the dough dictate when it is read to bake not the clock.

Around 45 minutes before ready to bake, pre-heat your oven to 550 degrees F. and prepare it for steam.  I have a heavy-duty baking pan on the bottom rack of my oven with 1 baking stone on above the pan and one on the top shelf.  I pour 1 cup of boiling water in the pan right after I place the dough in the oven.

Right before you are ready to put them in the oven, score as desired and then add 1 cup of boiling water to your steam pan or follow your own steam procedure.

After 5 minute lower the temperature to 450 degrees.  Bake for 35-50 minutes until the crust is nice and brown and the internal temperature of the bread is 205 degrees.

Take the bread out of the oven when done and let it cool on a bakers rack before for at least 2 hours before eating.

dsc_0086

dsc_0091

Here are some photos from my trip if you are interested.  There is so much to do you could easily stay a month and still not see half of the sites.  We were in Frankfurt, Munich and Nuremberg.

img_0537

Some vendors at the Munich train station. Some big ass breads!

 

img_0538

German Cannolis!

 

img_0541

Cheese and sausages!

 

img_0588

One of the best things I have ever eaten! Hand made pasta with shaved truffles in a cream sauce! There’s probably $50 worth of truffles alone in this dish. After this I had one of the best roasted fish. Who would think you have to go to Germany to have an amazing Italian meal!

 

img_0697

Some sight seeing in Nuremberg. Beautiful city.

img_0715

More Nuremberg.

img_0633

Famous Beer Garden in Munich

 

img_0634

Pancake Noodle Soup in beef broth

 

img_0636

Lunch at the beer hall! Some pork with onions and scalloped potatoes.

 

img_0657

Downtown Munich

img_0881

My summer home :). One of many castles you can visit in Munich.

img_0697

Hurricane Yeast Water Sourdough Corn Rye Bread

29 Oct

The storm is upon us as I try to write this post before losing power.  Hurricane Sandy is set to touch down in a few hours but already the wind is howling and the water is starting to rise over the docks on Long Island.

I baked this rye bread yesterday in preparation for possibly not having any bread or water for a while. Fortunately it came out as good as I could hope with the addition of a corn slurry added which added some nice moisture to the overall bread.

I built up a yeast water starter using white rye and pumpernickel flour in two builds and also used some of my existing AP sourdough starter as well.

Directions for Yeast Water Levain

Yeast Water Starter Build 1

40 grams White Rye Flour (KAF)

40 grams Pumpernickel Flour (KAF)

80 grams Yeast Water Starter

Mix the flour and Yeast Water in a bowl until thoroughly combined.  Cover the bowl and let it sit at room temperature for around 4 hours.  The starter should almost double when ready to proceed to build 2.

Build 2

Add ingredients below to starter from above and mix until incorporated.  Cover with plastic wrap and let sit at room temperature for 4 hours.

100 grams Pumpernickel Flour

100 grams Yeast Water Starter

Main Dough Ingredients

345 grams Rye Starter from above

80 grams AP Sourdough Levain Refreshed (65% Hydration)

305 grams First Clear Flour (KAF)

75 grams Potato Flour (Bob’s Red Mill)

100 grams Pumpernickel Flour (KAF)

85 grams Corn Flour (Bob’s Red Mill)

50 grams Rye Chops

141 grams Corn Slurry (1 small can of corn put in food processor for about 30 seconds, water drained before processing)

22 grams Pistachio Oil (You can sub Olive Oil or Vegetable Oil or any nut oil)

18 grams Seas Salt or Table Salt

350 grams Water at Room Temperature

Procedure

Mix the starters (levains) with the water to break them up in your mixer or by hand.  Next mix the flours, and rye chops with the starters in your mixer or by hand for 1 minute. Let it rest covered in your bowl for 20-30  minutes.   Next  add the oil, salt, and the corn slurry mix for 4 minute to incorporate all the ingredients. I mixed on speed #1 for 3 minutes and speed #2 for 1 minutes.   The dough should have come together in a ball and will be pretty sticky from the high percentage of rye flour.

Next take the dough out of the bowl and place it an oiled bowl or container.  Do a stretch and fold and rest the dough for 30 minutes.  After the rest do another stretch and fold and cover the dough and let it rest for 30 minutes.  Do one more stretch and fold and let it sit at room temperature covered for 2 hours.  After 2 hours you can put the dough into the refrigerator for 24 hours or up to 2 days before baking.  Feel free to do some additional S & F’s if you feel it is necessary.  I baked the bread about 24 hours later.

The next day (or when ready to bake) let the dough sit out at room temperature for 2  hours.

Next, form the dough into your desired shape and put them in floured bannetons, bowls or on a baking sheet and let them rise covered for 2 hours or until they pass the poke test.  I used my baker’s couche to let the batards rise.  Just make sure to not let them over-rise.  Note this dough is going to be very sticky so resist the urge to use too much flour just use enough to prevent sticking.

Score the loaves as desired and prepare your oven for baking with steam.

Set your oven for 500 degrees F. at least 30 minutes before ready to bake.  When ready to bake place the loaves into your on  your oven stone with steam and lower the temperature immediately to 450 degrees.    When both loaves are golden brown and reached an internal temperature of 200 degrees F. you can remove them from the oven.

Let the loaves cool down for at least an 3 hours or so before eating as desired.

This post has been submitted to the Yeast Spotting Site here: http://www.wildyeastblog.com/category/yeastspotting/.