The only problem with this bake was due to my stupidity I forgot to add in the starter which I had left in the bottom draw of my refrigerator. The only reason why I realized I had forgotten it was due to the fact I was looking for something to snack on and discovered my error. The lack of starter caused me to omit 95 grams of the water I was originally going to use. Fortunately, I was able to add the starter back into the dough since it was only bulk fermenting for around 1 hour.
The end result was still a tasty loaf with a nice moderately open moist crumb. It made great grilled bread and really was an excellent loaf. If I had added more water it would have been a little more open and moist but all in all it was a success.
Here are the Zip files for the above BreadStorm files.
I made a 2 step levain by using my AP starter which is kept at 66%.
Mix all the levain ingredients together for about 1 minute and cover with plastic wrap. Let it sit at room temperature for around 7-8 hours or until the starter has doubled. I used my proofer set at 83 degrees and it took about 4 hours. Next add the ingredients from the second levain column and mix for a minute. Wrap with plastic wrap and let it ferment until it doubles in size. You can use it immediately or refrigerate overnight and use the next day.
Oat Porridge Directions
Add about 3/4’s of the milk called for in the porridge to the dry ingredients in a small pot set to low and stir constantly until all the milk is absorbed. Add the remainder of the milk and keep stirring until you have a nice creamy and soft porridge. Remove from the heat and let it come to room temperature before adding to the dough. I put mine in the refrigerator and let it cool quicker.
Main Dough Procedure
Mix the flours and the water for about 1 minute. Let the rough dough sit for about 20 minutes to an hour. Next add the levain, cooled porridge and salt and mix on low for 5 minutes. Now add the cheese and mix for another minute. You should end up with a cohesive dough that is slightly tacky but very manageable. Remove the dough from your bowl and place it in a lightly oiled bowl or work surface and do several stretch and folds. Let it rest covered for 10-15 minutes and then do another stretch and fold. Let it rest another 10-15 minutes and do one additional stretch and fold. After a total of 2 hours place your covered bowl in the refrigerator and let it rest for 12 to 24 hours. (Since I used my proofer I only let the dough sit out for 1.5 hours before refrigerating).
When you are ready to bake remove the bowl from the refrigerator and let it set out at room temperature still covered for 1.5 to 2 hours. Remove the dough and shape as desired.
The dough will take 1.5 to 2 hours depending on your room temperature and will only rise about 1/3 it’s size at most. Let the dough dictate when it is read to bake not the clock.
Around 45 minutes before ready to bake, pre-heat your oven to 550 degrees F. and prepare it for steam. I have a heavy-duty baking pan on the bottom rack of my oven with 1 baking stone on above the pan and one on the top shelf. I pour 1 cup of boiling water in the pan right after I place the dough in the oven.
Right before you are ready to put them in the oven, score as desired and then add 1 cup of boiling water to your steam pan or follow your own steam procedure.
After 5 minute lower the temperature to 450 degrees. Bake for 35-50 minutes until the crust is nice and brown and the internal temperature of the bread is 205 degrees.
Take the bread out of the oven when done and let it cool on a bakers rack before for at least 2 hours before eating.
This post has been submitted to the Yeast Spotting Site here: http://www.wildyeastblog.com/category/yeastspotting/.